Marantec set sectional doors up to 30 m², 230 V-AC motor, 100 Nm, 30 min-1, AWG, with frequency converter control CS 320 FU

STA 1-10-30 E-KE D230 V/3~ AWG 25.4 IP65 – CS320FU-I – 7.0 m

Scope of delivery:

• Drive STA 1-10-30 E-KE 230 V/1~ FU/I AWG 25.4 mm IP65 with 1,000 mm reel chain
• Control CS 320 FU/I 230V/1~ in CS standard housing with 3-way button and LC display in the cover, connection cable with Schuko plug type F
• Cable set with connection terminals and cable bushings in control and drive, 7,000 mm
• Reel chain: 4,000 mm, with 2 chain locks
• release cable 6,000 mm
• Torque support 1 L-shape
• Accessory bag STA with high key

Drive – Features:

• Die-cast aluminum housing, rolled worm shaft and double worm shaft bearing
• Emergency operation via emergency hand crank (KU), emergency hand chain (KE), emergency release (E), emergency release with spring return (E-FR) or maintenance release with emergency hand chain (E-KE)
• maintenance release optional
• Easy conversion from crank to chain
• Hollow shaft 25.4 mm as standard, special hollow shaft on request
• Supply: 230 V/1~/50 Hz
• thermal protection in the motor winding
• For gate systems with above-average switching, a drive with an increased motor duty cycle (HD) should be selected.
• Pluggable connections (control side)
• End position adjustment via electronic absolute encoder (AWG) or mechanical limit switches (MEC)
• Version with integrated frequency converter and external control. Supply: 230 V/1~, Frequency: 50/60 Hz, Control voltage: 24 V-DC
• The soft start and soft stop technology ensures a longer service life for the gate system, as the gate mechanism is subjected to less stress. This reduces repair costs.
• Special designs such as additional voltages and frequencies, higher protection classes and hollow shaft diameters on request
• If the output speed is increased (operation with a frequency converter), the output torque is reduced. In this case, an increase in the output speed by 10% causes a reduction in the output torque by 5%.
• For temperature ranges below -20 °C, suitable oil and electric heating are available on request

Control – Functions:

• Speed-independent control of gates
• Start and end speed can be set separately for both directions
• Additionally 2nd final speed adjustable in direction CLOSE
• Acceleration and deceleration times adjustable for both directions
• Acceleration and deceleration times for the actuation of the travel command, stop command, closing edge protection and light barrier can be set separately
• Braking points freely selectable/adjustable braking deceleration
• Adjustable power values ​​to adapt to the engine
• 4 programmable relay outputs with 44 functions
• 2 programmable inputs with 27 functions
• Rotation direction monitoring and detection (only with AWG)
• Integrated gate travel counter
• Programmable maintenance alarm (PIN code protected)
• Integrated error memory (reading of all error messages including frequency and cycle of the last occurrence) only with LCD monitor
• Change of direction of rotation via circuit board button/display
• Adjustable force limitation in OPEN direction (only with AWG)
• Intermediate position programmable (only with AWG)

Control – End position setting:

• Via mechanical limit switches (MEC) and/or via absolute encoders (AWG)
• setting via LC monitor

Control – Operation:

• PCB buttons and LEDs for status reporting (standard)
• Plug-in LC display with plain text display
• 3-button navigation/status and diagnostic messages

Control – structure and connection:

• short-circuit-proof extra-low voltage
• Supply for external devices (24 V-DC/500 mA and 230 V-AC/1 A)
• Illuminated lid keyboard (night lighting)
• housing protection for printed circuit board
• Adjustable, pre-assembled wall brackets
• connection for elements of the safety circuit
• Connection for closing edge safety device (opto, 8.2 kOhm, pressure wave bar or leading light barrier) in CLOSE direction
• Connection for closing edge safety device (8.2 kOhm and opto) in OPEN direction
• Connection for 2 light barriers (2-wire, relay, NPN, PNP) with/without testing
• Connection for wicket door and slack rope switch PL c Cat. 2 (8.2 kOhm) with testing according to EN 12453:2017
• Connection for 2 light grid systems with/without testing
• interface for connecting expansion modules
• slots for radio module and weekly timer
• Slot for 2-channel radio transmission system for wireless signal transmission of closing edge system and/or safety circuit
• Control of the magnetic brake via relay output
• For drives with externally switched brakes, an additional brake monitoring module is installed (BWM1)
• Interface for connecting a frequency converter
• Switchable transformer from 230 V/1~/3~ to 400 V/3~
• Plug-in LC display with plain text display

Control – Optional:

• MS-Bus extension module oncoming traffic control
• MS-Bus extension module pull-in protection
• Integrated main switch
• Individual lidding films
• Frequency converter integrated in the drive (version FU-I without brake, only 0.75 kW)
• control in the steel cabinet
• Product descriptive data
  connection type conventional

  brake control without brake

  Continuous sound pressure level (max.) [dB(A)] 70

  end position system absolute encoder

  Safety gear integrated No

  Gearbox rolled worm shaft double bearing worm shaft

  Emergency operation maintenance release with emergency hand chain (E-KE)

  protection class IP65

  control type external

  Overload protection thermal protection 140 °C

  brake type without brake
  application area
  Temperature (min./max.) [°C] -20/60

  Operation with CS 320 FU (frequency converter 230 V/1~) 0.75 kW

  Gate area at 50 Hz (max.) [m²] 45

  Gate area at 87 Hz (max.) [m²] 30
  performance data
  Output torque at 50 Hz [Nm] 100

  Output torque at 87 Hz [Nm] 70

  Output speed at 50 Hz [1/min] 30

  Output speed at 87 Hz [1/min] 52

  Holding torque (min.) [Nm] 600

  Revolutions output (max.)** 20

  Cycles per hour (max.)* 20

  Engine power [kW] 0.55
  Electrical data
  Operating voltage [V] 230 V/1~

  Operating voltage type alternating current

  power factor cos phi 0.72

  Motor voltage [V] 230 V/3~

  Nominal frequency [Hz] 50

  Control voltage [V] 12-24 V-DC

  Rated current at 230 V/3~ [A] 3.50

  On-site fuse (FU operation 230V/1~) [A] 16
  dimensions and weights
  Weight [kg] 16

  Dimension A [mm] 278

  Dimension A1 [mm] 55

  Dimension B [mm] 104

  Dimension C [mm] 409

  Dimension C1 [mm] 55

  Shaft mount [mm] 25.4

  Shaft mount (optional) [mm] 25 30 31.75 32 mm Hexagon (HEX) 35
  CS 320 FU-I 0.75 kW
  Product descriptive data
  Frequency converter type internal frequency converter

  housing type CS-Standard

  protection class IP65

  LCD display type

  Main switch in the control cover without main switch

  Push button in the control cover electronic 3-way button CS

  Emergency stop in the control cover without emergency stop

  Function switch in the control cover without function switch

  Power plug Schuko plug type F
  application area
  Temperature (min./max.) [°C] -10/45
  performance data
  Output power [kW] 0.75
  Electrical data
  Output voltage [V] 230 V/1~

  Output current [A] 4.1

  On-site supply 230 V/1~/50 Hz

  Input voltage [V] 230 V/1~

  Input current [A] 10

  Load capacity Power (max.) [kW] 0.75

  Switching current (max.) [A] 4.1

  Control voltage [V] 24 V-DC
  dimensions and weights
  Weight [kg] 1.8

  Dimensions (WxHxD) [mm] 215x275x190