Marantec for sectional doors up to 30 m² (50 Hz), 230 V-AC motor, 100 Nm, 30 min-1, AWG, with frequency converter control CS 320 FU

Scope of delivery:

• Drive STA 1-10-30 KE 230 V/1~ FU/I AWG 25.4 mm with 1,000 mm reel chain
• Control CS 320 FU/I 230V/1~ in CS standard housing with 3-way button and LC display in the cover, connection cable with Schuko plug type F
• Cable set with connection terminals and cable bushings in control and drive, 7,000 mm
• Reel chain: 9,000 mm, with 2 chain locks
• Torque support 1 L-shape
• accessory bag STA Standard
• Spiral cable 5x0.25 mm² with mounting bracket, cable glands, connection terminals for the control and plug for the door leaf connection box, 3,000 mm uncoiled/800-3,200 mm coil length
• Gate leaf connection box with circuit board, opening for spiral cable and 4 cable entries
• F-light barrier transmitter 10,500 mm/receiver 1,000 mm with 2 F-spacer sleeves 11/22 mm

Drive – Features:

• Die-cast aluminum housing, rolled worm shaft and double worm shaft bearing
• Emergency operation via emergency hand crank (KU), emergency hand chain (KE), emergency release (E), emergency release with spring return (E-FR) or maintenance release with emergency hand chain (E-KE)
• maintenance release optional
• Easy conversion from crank to chain
• Hollow shaft 25.4 mm as standard, special hollow shaft on request
• Supply: 230 V/1~/50 Hz
• thermal protection in the motor winding
• For gate systems with above-average switching, a drive with an increased motor duty cycle (HD) should be selected.
• Pluggable connections (control side)
• End position adjustment via electronic absolute encoder (AWG) or mechanical limit switches (MEC)
• Version with integrated frequency converter and external control. Supply: 230 V/1~, Frequency: 50/60 Hz, Control voltage: 24 V-DC
• The soft start and soft stop technology ensures a longer service life for the gate system, as the gate mechanism is subjected to less stress. This reduces repair costs.
• Special designs such as additional voltages and frequencies, higher protection classes and hollow shaft diameters on request
• If the output speed is increased (operation with a frequency converter), the output torque is reduced. In this case, an increase in the output speed by 10% causes a reduction in the output torque by 5%.
• For temperature ranges below -20 °C, suitable oil and electric heating are available on request

Control – Functions:

• Speed-independent control of gates
• Start and end speed can be set separately for both directions
• Additionally 2nd final speed adjustable in direction CLOSE
• Acceleration and deceleration times adjustable for both directions
• Acceleration and deceleration times for the actuation of the travel command, stop command, closing edge protection and light barrier can be set separately
• Braking points freely selectable/adjustable braking deceleration
• Adjustable power values ​​to adapt to the engine
• 4 programmable relay outputs with 44 functions
• 2 programmable inputs with 27 functions
• Rotation direction monitoring and detection (only with AWG)
• Integrated gate travel counter
• Programmable maintenance alarm (PIN code protected)
• Integrated error memory (reading of all error messages including frequency and cycle of the last occurrence) only with LCD monitor
• Changing the direction of rotation via circuit board button/display
• Adjustable force limitation in OPEN direction (only with AWG)
• Intermediate position programmable (only with AWG)

Control – End position setting:

• Via mechanical limit switches (MEC) and/or via absolute encoders (AWG)
• setting via LC monitor

Control – Operation:

• PCB buttons and LEDs for status reporting (standard)
• Plug-in LC display with plain text display
• 3-button navigation/status and diagnostic messages

Control – structure and connection:

• short-circuit-proof extra-low voltage
• Supply for external devices (24 V-DC/500 mA and 230 V-AC/1 A)
• Illuminated lid keyboard (night lighting)
• housing protection for printed circuit board
• Adjustable, pre-assembled wall brackets
• connection for elements of the safety circuit
• Connection for closing edge safety device (opto, 8.2 kOhm, pressure wave bar or leading light barrier) in CLOSE direction
• Connection for closing edge safety device (8.2 kOhm and opto) in OPEN direction
• Connection for 2 light barriers (2-wire, relay, NPN, PNP) with/without testing
• Connection for wicket door and slack rope switch PL c Cat. 2 (8.2 kOhm) with testing according to EN 12453:2017
• Connection for 2 light grid systems with/without testing
• interface for connecting expansion modules
• slots for radio module and weekly timer
• Slot for 2-channel radio transmission system for wireless signal transmission of closing edge system and/or safety circuit
• Control of the magnetic brake via relay output
• For drives with externally switched brakes, an additional brake monitoring module is installed (BWM1)
• Interface for connecting a frequency converter
• Switchable transformer from 230 V/1~/3~ to 400 V/3~
• Plug-in LC display with plain text display

Control – Optional:

• MS-Bus extension module oncoming traffic control
• MS-Bus extension module pull-in protection
• Integrated main switch
• Individual lidding films
• Frequency converter integrated in the drive (version FU-I without brake, only 0.75 kW)
• control in the steel cabinet
• Product descriptive data
  connection type conventional

  brake control without brake

  Continuous sound pressure level (max.) [dB(A)] 70

  end position system absolute encoder

  Safety gear integrated No

  Gearbox rolled worm shaft double bearing worm shaft

  Emergency operation chain with automatic zero setting

  protection class IP54

  control type external

  Overload protection thermal protection 140 °C

  brake type without brake
  application area
  Temperature (min./max.) [°C] -20/60

  Operation with CS 320 FU (frequency converter 230 V/1~) 0.75 kW

  Gate area at 50 Hz (max.) [m²] 45

  Gate area at 87 Hz (max.) [m²] 30
  performance data
  Output torque at 50 Hz [Nm] 100

  Output torque at 87 Hz [Nm] 70

  Output speed at 50 Hz [1/min] 30

  Output speed at 87 Hz [1/min] 52

  Holding torque (min.) [Nm] 600

  Revolutions output (max.)** 20

  Cycles per hour (max.)* 20

  Engine power [kW] 0.55
  Electrical data
  Operating voltage [V] 230 V/1~

  Operating voltage type alternating current

  power factor cos phi 0.72

  Motor voltage [V] 230 V/3~

  Nominal frequency [Hz] 50

  Control voltage [V] 12-24 V-DC

  Rated current at 230 V/3~ [A] 3.50

  On-site fuse (FU operation 230V/1~) [A] 16
  dimensions and weights
  Weight [kg] 16

  Dimension A [mm] 278

  Dimension A1 [mm] 55

  Dimension B [mm] 104

  Dimension C [mm] 409

  Dimension C1 [mm] 55

  Shaft mount [mm] 25.4

  Shaft mount (optional) [mm] 25 30 31.75 32 mm Hexagon (HEX) 35
  CS 320 FU-I 0.75 kW
  Product descriptive data
  Frequency converter type internal frequency converter

  housing type CS-Standard

  protection class IP65

  LCD display type

  Main switch in the control cover without main switch

  Push button in the control cover electronic 3-way button CS

  Emergency stop in the control cover without emergency stop

  Function switch in the control cover without function switch

  Power plug Schuko plug type F
  application area
  Temperature (min./max.) [°C] -10/45
  performance data
  Output power [kW] 0.75
  Electrical data
  Output voltage [V] 230 V/1~

  Output current [A] 4.1

  On-site supply 230 V/1~/50 Hz

  Input voltage [V] 230 V/1~

  Input current [A] 10

  Load capacity Power (max.) [kW] 0.75

  Switching current (max.) [A] 4.1

  Control voltage [V] 24 V-DC
  dimensions and weights
  Weight [kg] 1.8

  Dimensions (WxHxD) [mm] 215x275x190